IQ analyzer for Narda SignalShark

Detection, analysis and documentation of interference signals was never as easy as it is with Narda’s new IQ analyzer for SignalShark.
Whether caused by

• Faulty oscillator
• Welding systems
• Defective relays
• Defective lamps
• Jammers
• or others

interferences can easily be detected due to the IQ analyzer’s outstanding time resolution down to nanoseconds.

IQ Analyzer with 1.6 GB ring buffer, real-time trigger, time domain analysis and spectrograms

• Time Res. IQ – Magnitude down to 20 ns (CBW 20 MHz, Oversampling On)
• Time Res. IQ – Spectrogram down to 320 ns (CBW 20 MHz, Oversampling On, RBW 766.2 kHz, 87.5 % Overlap)

Up to 1.6 GB of IQ data can be continuously recorded in a ring buffer. This allows recording of a 40 MHz channel over 5 seconds. Narrower channels can be recorded for a correspondingly longer time. Short-term or sporadic signals can be detected via various trigger functions such as “Gated Trigger“

Detection, analysis and documentation of hopping signals.

Special feature: even after the measurement it is possible to switch between a high time resolution and a high frequency resolution. This allows a signal to be analysed in its entire depth. Up to eight markers support the determination of signal parameters.

>> see more information about IQ Analyzer in the datasheet here