Working with delta markers

All markers can be set to show values according to their position or to display deltas to another marker. The settings can be changed directly from the [Button bar] or from the [Marker Configuration] menu.

Setting a marker to delta from the Button bar

A delta marker can be defined directly from the [Button bar]. When set from the [Button bar] only marker 1 can be the referenced marker. To select another marker as reference, see Setting a marker to delta from the Marker Configuration menu.

To set a marker as delta marker:

1.   In the [Button bar] select a marker.

The selected marker is displayed above the measurement display.

2.   In the [Type] field select [Delta].

The name of the marker in the marker list is changed from [My] to [Mx] (e.g. [M4] to [D4]).
The displayed values are the differences to marker 1.

Setting a marker to delta from the Marker Configuration menu

When setting a marker to delta from the Marker Configuration menu, any other marker can be chosen as a reference.

To set a marker as delta marker:

1.   In the [Button bar] tap [Marker Conf.].

The [Marker Config] menu opens.

2.   In the [Type] field select [D].

The type of the marker in the marker list changes from [M] to [D]. Marker 1 is set as reference (default).

To select a reference marker:

The [Marker Config] menu is displayed.

1.   Select a delta marker from the list.

2.   In the [Button bar] tap [Ref.].

A dropdown list opens in the display header.

3.   Select a marker from the list.

4.   Tap the header of the [Button bar] twice to close the menus.