SRM-3006 Firmware

The Selective Radiation Meter SRM-3006 is always delivered with the latest firmware version installed. As the firmware is being constantly developed, it is a good idea to update the device on a regular basis. Use the SRM-3006 Tools or SRM-3006 TS PC software to update the device. Simply follow the instruction in the SRM operating manual or in the on line help for SRM-3006 TS.

The latest firmware contains:

• "Safety Evaluation" mode
• "Spectrum Analysis" mode
• "Level Meter" mode
• "Scope" mode (option)
• "UMTS P-CPICH Demodulation" mode (option)
• "LTE Demodulation" mode (option)
• "5G NR" mode (option)

The options are charged extra and can only be activated by a special code. Contact your local Sales Partner for details.

Please note the following when updating the firmware:

A firmware update can take up to 30 minutes. Prematurely canceling the update can cause data loss and render the instrument inoperable.

• Finish all measurements.
• Export all the data you wish to retain to a PC, as such data could be lost during an update. If this happens, the data cannot be restored. 
• Make sure that the power supply is uninterrupted during the update. Connect the AC adapter/charger to ensure this.
• Only start the update when you have done the above.
• Wait until the update completes successfully before you change any settings on the SRM.

SRM-3000 Firmware

The Selective Radiation Meter SRM-3000 is always delivered with the latest firmware version installed. As the firmware is being constantly developed, it is a good idea to update the device on a regular basis. Use the SRM-3000 Tools or SRM-3000 TS PC software to update the device. Simply follow the instruction in the SRM-3000 operating manual or in the on line help for SRM-3000 TS.

The latest firmware contains:

• "Safety Evaluation" mode
• "Spectrum Analysis" mode
• "UMTS P-CPICH Demodulation" mode (option)
• "Time Analysis" mode
• "Conditional Storing" function
• "Time Controlled Storing" function (option)
• "Spatial Averaging" function (option)

The options are charged extra and can only be activated by a special code. Contact your local Sales Partner for details.

SRM-3000 TS

SRM-3000 TS is the convenient PC software for SRM-3000. It is available as an option in addition to the SRM-3000 Tools PC software supplied with the device. SRM-3000 TS includes all the functions of SRM-3000 Tools and the following additional functions:

• Visualization of stored measurement results
• Offline analysis of stored measurement results
• Remote control of SRM (incl. live signals on the PC)
• Convenient measurement data export to Microsoft Office applications
• Measurement data management in databases
• Direct printout of measurement results
• Screenshots of a GUI similar to the instrument (copy & paste function)

SRM-3006 TS

In addition to the free SRM-3006 Tools PC software, the optional SRM-3006 TS PC software is additionally available. This includes all the functions of SRM-3006 Tools plus the following additional functions (among others):

• Visualization of stored measurement results
• Offline analysis of stored measurement results
• Remote control of SRM (incl. live signals on the PC)
• Import of measurement data exported with SRM-3006 Tools
• Convenient measurement data export to Microsoft Office applications
• Measurement data management in databases
• Direct printout of measurement results

SRM-3006 Tools

SRM-3006 Tools is a simple uncomplicated interface between the SRM-3006 and PC. The software allows

• Downloading of measurement data to PC
• Downloading of screenshots to PC
• Creation of antenna, cable and service tables, measurement routines and user defined standards
• Setting of the instrument configuration
• Enabling of options and updating the device software (firmware)

SRM-3006 TS

In addition to the free SRM-3006 Tools PC software, the optional SRM-3006 TS PC software is additionally available. This includes all the functions of SRM-3006 Tools plus the following additional functions (among others):

• Visualization of stored measurement results
• Offline analysis of stored measurement results
• Remote control of SRM (incl. live signals on the PC)
• Import of measurement data exported with SRM-3006 Tools
• Convenient measurement data export to Microsoft Office applications
• Measurement data management in databases
• Direct printout of measurement results

SRM-3006 Tools

SRM-3006 Tools is a simple uncomplicated interface between the SRM-3006 and PC. The software allows

• Downloading of measurement data to PC
• Downloading of screenshots to PC
• Creation of antenna, cable and service tables, measurement routines and user defined standards
• Setting of the instrument configuration
• Enabling of options and updating the device software (firmware)

SRM-3000 Tools

SRM-3000 Tools is a simple uncomplicated interface between the SRM-3000 and PC. The software allows

• Downloading of measurement data to PC
• Downloading of screenshots to PC
• Creation of antenna, cable and service tables, measurement routines and user defined standards
• Setting of the instrument configuration
• Enabling of options and updating the device software (firmware)