The measurement info bar on the bottom of the screen gives information about the current measurement depending on the selected view. The contents of the display may vary, depending on the operating mode.
The displayed parameters depend on the selected application.
RefL/Attn |
Reference level / Attenuation |
Input |
RF input |
Fcent |
Center frequency |
Fspan |
Displayed frequency span |
RBW |
Resolution bandwidth |
Meas. Time |
The measurement or detector time defines the time range used by the internal detectors to calculate their values (+Pk, RMS, -Pk, ...). For spectrogram, this is the time of one spectrogram line. |
Scan No. |
Number of measurements since starting run. |
Scan Count |
Number of measurement cycles for one single run. This parameter also controls the memory depth of the MxP, MxR, MnR and MnP traces. |